Magnum MD 107T Instruction Manual download pdf (Page 9)

- 9 -

TUNER REMOTE (OPTIONAL)

If your tuner was ordered with the RC6 “PRECISION REMOTE SYSTEM”, here are

the operating instructions.

1. The power switch should be off on the front panel of the tuner

2. Using the remote handheld, push the red “TUNER” button. You will see the

tuner turn on.

3. To tune with the handheld, push and then hold either the “TUNE UP” or

“TUNE DOWN” button until you reach the desired station. The longer you

hold the button the faster the frequency changes. To FINE TUNE hold either

button for a shorter time, or tap until your magic eye tube is closed.

4. Your Precision remote gives you the ability to store and scan up to 20

preset stations. To program a preset station, first tune to the desired

station and then push “STORE”. Then select the preset memory position you

want to store this station in by selecting two digits. For numbers 1-9 you

must select 01-09 and for 10+ directly enter the number.

*NOTE-When setting a preset you must enter the numbers quickly and tap, do

not hold down, the buttons as they are very sensitive.

* Once presets have been entered, briefly turn off the unit with the remote to

save changes

5. To recall a preset, you can push the preset button and the number of the

preset you want.

6. To reset or purge the presets press “p” then “s” within 5 seconds.

7. To turn your tuner off, push the “TUNER OFF” button until you see the tuner

turn off.

** If you have purchased the optional DAC upgrade to the MD 107T, you may

switch between inputs using the left knob or your remote.

Press the “input” button then number: 6 for D1 - RCA

7 for D2 – Optical

8 for USB

9 for Tuner

Your RC6 remote operates with 2 AA batteries, which are included.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Magnum MD 107T Instruction Manual Page 9